Cantilever and post-supported canopies for parking lots, playgrounds, patios and building entries — designed, fabricated and installed by one in-house team.

A fabric shade structure is an engineered steel frame — posts, arms and cable hardware — that holds a tensioned architectural fabric above the space it protects. Unlike a stock canopy, every post location, footing and fabric panel is calculated for the site’s wind zone and use.
They are the right fit for parking lots, playgrounds, school courtyards, dining patios, bus stops and building entries: places that need dependable shade at a moderate span without the cost of a full membrane roof.
Larger, column-free spans and sculptural double-curved roofs fall under tensile membrane structures.
| Specification | Detail |
|---|---|
| Structure types | Cantilever and post-supported canopies |
| Frame | Hot-dip galvanized, powder-coated steel |
| Fabric options | PVC-coated polyester or HDPE knitted mesh |
| UV protection | 90–98% depending on fabric |
| Colors | Multiple standard fabric and frame colors |
| Engineering | Site-specific; stamped documentation available |
| Fabric warranty | 8–10 years (per manufacturer) |
| Typical uses | Parking, playgrounds, entries, courts, seating |
Final specifications are confirmed for each project during engineering. Ask our team for project-specific details.
Cantilever designs keep the shaded area open under the canopy; post-supported designs span wider areas economically.
Footings, steel sections and fabric are sized for local wind and snow-load requirements — never a generic rating.
HDPE knitted mesh or PVC-coated polyester, selected for shade level, airflow and color. See materials.
Powder-coated steel and replaceable fabric panels keep long-term cost down and the structure in service.

Shade for players and spectators, over courts, dugouts and bleachers.
Cooler surfaces and safer play areas for students.
Protected vehicles, walkways and drop-off zones.

Seating and stage coverage for outdoor events.
We review sun path, use and anchor conditions, then propose a layout.
Site-specific structural design and footing details — stamped documentation available for permits and bids.
Steel is fabricated and finished; fabric panels are cut and welded to size.
Footings, frame and fabric installed by our crew, with a final walkthrough.
Cost depends on size, structural complexity, fabric and site conditions. We provide a free, no-obligation estimate after a site visit or a review of your plans.
Commercial and institutional structures usually require a permit, and engineered documentation is part of that package. We can provide site-specific engineering support for your bid or permit submittal.
Fabrication and installation timelines vary by project size and season. After consultation we give you a written schedule; many smaller structures install in days once fabrication is complete.
Fabric shade structures use a frame with a tensioned canopy at moderate spans. Tensile membrane structures use double-curved membranes to span larger, column-free areas and often act as a signature architectural element.

Site-engineered membranes with column-free spans up to 100 ft.
Freespan fabric buildings for salt sheds, storage and equipment.

Made-to-measure commercial shade sails, from layout to anchor points.
Fabric replacement, hardware checks and re-tensioning.
Free site consultation and quote — in-house engineering, one point of contact.